VR Goggles: Connect to Wireless Networks
Configure initial Wireless Setup at using WFUwireless
During the initial device setup WFU students will use the following settings:
- EAP Method: PEAP
- Phase 2 authentication: MSCHAPV2
- CA certificate: Use system certificates
- Domain: wfunetwork.wfu.edu
- Identity: Your WFU username (everything before @ in email)
- Anonymous identity: leave blank
- Password: Your WFU password
- Click Done
Configure Home and other non-WFU Wireless Networks
After the initial configuration, the device will recognize other wireless networks. Use one of the following options to change the new wireless network:
No Internet Connection
- If the device has no Internet connection the following message will appear
- Click Open Wi-Fi Settings using the primary controller trigger
- Select the desired SSID from the list of detected wireless networks
- Enter the wireless password if required.
Switch to different Wireless Network
- If the device is connected to a wireless network but needs to access a different wireless network, use the following steps.
- On your Home Bar, use your primary controller trigger to select the wireless icon.
- The current Wi-Fi connect appears.
- Use the primary controller trigger to select the Wi-Fi network and open the list of detected wireless networks
- Select the desires SSID
- Enter the wireless password if required
Return to VR Goggles: Setup Overview for Meta Quest 2